Rockwell Automation Publication 2198-UM004D-EN-P - December 2022 117
Chapter 6
Use the Keypad Interface
Keypad Input and Panel
Display
The Kinetix® 5100 drive is equipped with a diagnostic status indicator and five
push buttons that are used to display information and to edit a limited set of
parameter values.
The drive has three status indicators: Charge, MOD, and NET. For an
explanation of their functions, see Status Indicators
on page 449. For more
information on how the keypad and status indicator can be used to do tuning,
see Autotuning via the Drive Panel
on page 204.
Figure 72 - Keypad and Display
Topic Page
Keypad Input and Panel Display 117
Drive Displays 118
Edit Settings From the Display 122
Item Key Name Description
1— Display
A 5-digit, 7-segment status indicator that displays the monitoring
values, parameters, and setting values.
2Mode key
Use this key to return to the parent menu or, if there is one, to return to
the previous menu.
3Up key
Use this key to return to the previous menu. It is also increases the
values that you edit while in the configuration and parameter edit
screens.
4Down key
Use this key to advance to the next menu. It also decreases the values
that you edit while in the configuration and parameter edit screens.
5 Shift key Use this key to toggle between the digits or menus in the same level.
6Set key
Use this key to enter a sub-menu, if one exists, or to confirm a value
that you have edited.
To Next Page
Loading...
Need help?
General
