158 Rockwell Automation Publication 2198-UM004D-EN-P - December 2022
Chapter 7 Configure the Drive with KNX5100C Software
2. Change the ControlMode value by clicking directly in its value field and
typing a new value.
• Another way to change the parameter is to double-click the value,
which opens the ControlMode dialog box.
3. In KNX5100C software, choose the Operation Mode from the main
screen pull-down menu.
After the parameter value is changed, the following reminder appears.
When the parameter value is changed and has not been downloaded to the drive,
there will be a '*' mark next to the value field.
Click the box immediately to the left of the parameter to see the present value of
the parameter in the drive. The drive is polled immediately and updates the
Value field.
To Next Page
Loading...
Need help?
General
