Version 7.2 473 Mediant MSBR
Reference Guide 69. sip-definition
Command Description
display-default-sip-
Enables default port 5060 shown in the headers.
e911-callback-timeout
Defines the maximum time for an E911 ELIN callback to
be valid (minutes).
Enables E911 to NG911 gateway and ELIN handling.
emerg-calls-regrt-t-
Defines the regret time for Emergency calls.
Defines emergency numbers.
set configuration
Enables RADIUS.
Enables DID.
Enables requirement of ptime parameter in SDP.
Enables SIP secured URI usage.
enbl-non-inv-408
Enables sending 408 responses for non-INVITE
transactions.
Defines the ENUM domain for ENUM resolution.
Enables enforcement reuse of TCP/TLS connection.
Enables rerouting of fax calls to fax destination.
Defines fax signaling method.
Enables filtering of calls to IP.
force-rport
Enables responses sent to the UDP port from where the
Request was sent, even if RPORT parameter was not
received in the Via header.
forking-delay-time-
Defines the forking delay time (in seconds) to wait before
sending INVITE of second forking call.
Defines the Graceful Busy Out timeout in seconds.
Limits the device call time duration (minutes).
Enables History-Info header support.
Ignores MKI if present in the remote SDP
Enables immediate trying sent upon INVITE receive.
ip-security
Defines the mode to handle calls based on ip-
in ip2tel-rte-tbl.
ldap-display-nm-attr
Defines the name of the attribute which represents the
user display name in the Microsoft AD database.
ldap-mobile-nm-attr
Defines the name of the attribute which represents the
user Mobile number in the Microsoft AD database.
ldap-ocs-nm-attr
Defines the name of the attribute which represents the
user OCS number in the Microsoft AD database.
To Next Page
Loading...
Need help?
General
