Reference Guide 474 Document #: LTRT-17939
Mediant MSBR
Command Description
ldap-pbx-nm-attr
Defines the name of the attribute which represents the
user PBX number in the Microsoft AD database.
ldap-primary-key
Defines the name of the query prima
AD database.
ldap-private-nm-attr
Defines the name of the attribute which represents the
user Private number in the Microsoft AD database.
ldap-secondary-key
Defines the name of the query secondary key in the
Microsoft AD database.
max-491-timer
Defines the maximum timer for next request transmission
after 491 response.
Defines the limit of number of concurrent calls.
Defines the Media CDR reports,
message-policy-reject-
Defines the response type returned when a message is
rejected according to the Message Policy.
microsoft-ext
Enables Microsoft proprietary Extension to modify called-
nb.
Defines the minimum call duration.
ms-mx-rcrd-dur
Defines the maximum record duration supported by
Microsoft.
mult-ptime-format
Defines the format of multiple ptime (ptime per coder) in
outgoing SDP.
Defines the call time duration limit (minutes).
Defines the maximum duration for an IVR dialog.
Defines the Network Node ID.
Rejects ISDN transfer requests.
Defines the NoAudio payload type.
Enables CDR message for all non-call dialogs.
number-of-active-
Defines the number of concurrent non-responded dialogs.
Defines the Out-Of-Service Behavior for FXS.
Defines the Opus Max Average Bitrate (bps).
overload-sensitivity-
Defines when to enter overload state.
p-assrtd-usr-name
Defines the user part of the user url in the P-Asserted-
Identity header.
Enables play Busy Tone to Tel.
Enables ringback tone playing towards IP.
Enables ringback tone playing towards Tel side.
polarity-rvrsl
Enables FXO Connect/Disconnect call upon detection of
polarity reversal signal. FXS: generates the signal.
Defines the PRACK mode for 1XX reliable responses.
To Next Page
Loading...
Need help?
General
