Version 7.2 475 Mediant MSBR
Reference Guide 69. sip-definition
Command Description
Defines the whether to send the Progress Indicator to IP.
pstn-alert-timeout
Defines the m
ax time (in seconds) to wait for connect from
PSTN.
Defines the release cause for SIT IC.
Defines the release cause for SIT RO.
Defines the release cause for SIT VC.
qos-effective-period
Defines the QoS period - if during this period [in seconds],
no updated QOS info received, the old QOS info is
discarded. if QOS poor, and no calls allowed, after this
period, calls will be allowed again
Defines the number of samples to average.
qos-statistics-in-
Defines whether to add statistics to call release.
Defines the when RADIUS Accounting messages are sent.
rai-high-threshold
Defines the percentage of active calls to send 'Almost out
of resources' RAI.
Defines the time period to check call resources (seconds).
rai-low-threshold
Defines the percentage of active calls to send 'Resources
OK' RAI.
reanswer-time
Defines the time to wait between phone hang up and call
termination.
Enables Reason header in outgoing messages.
Defines the type of default record URI used by Media Ctrl.
Defines whether or not reject Cancel request after connect
reject-on-ovrld
If set to false (0), a 503 response will not be sent on
overload.
Defines the release cause mapping format.
release-cause-for-sit-
Defines the release cause for SIT NC.
reliable-conn-
If set to 1 - AllTCP/TLS connections are set as persistent
and will not be released.
Enables the Remote-Party-ID header.
remove-to-tag-in-fail-
Removes to-tag in final reject response for setup INVITE
transaction.
rep-calling-w-redir
Replaces Calling Number with Redirect Number ISDN to
IP.
replace-nb-sign-w-esc
Replaces the number sign (#) with the escape character
%23 in outgoing SIP messages.
Resets SRTP State Upon Re-key.
resource-prio-req
Indicates whether or not Require header is able to contain
the resource-priority tag.
To Next Page
Loading...
Need help?
General
