Cisco ONS 15454 SDH - Page 23

TABLES
iii
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Table 1-1 Cable Models and Model Numbers 1-3
Table 1-2 ONS 15454 SDH Shelf Installation Task Summary 1-19
Table 2-1 ONS 15454 SDH Card and Slot Compatibility for the XC-VXL-2.5G Cards 2-3
Table 2-2 Slot Compatibility for the XC-VXL-10G or XC-VXC-10G Card 2-5
Table 2-3 Maximum Bandwidth by Shelf Slot for the MRC-12 in Different Cross-Connect Configurations 2-9
Table 2-4 Optical Transmit and Receive Levels 2-17
Table 3-1 CTC Computer Setup for Local Craft Connection to the ONS 15454 SDH 3-3
Table 4-1 Card Protection Types 4-11
Table 6-1 ONS 15454 SDH Circuit Options 6-3
Table 6-2 CTC Circuit Source and Destination Options for Low-Order VC3 Circuits 6-3
Table 6-3 CTC Circuit Source and Destination Options for Low-Order VC12 or VC11 Circuits 6-4
Table 6-4 CTC Circuit Source and Destination Options for High-Order VC4 Circuits 6-4
Table 12-1 Port Migration Information 12-13
Table 15-1 Audit Trail Column Definitions 15-11
Table 15-2 ONS 15454 SDH Timing Report 15-19
Table 15-3 Incompatibility Alarms 15-23
Table 17-1 Pin Connection of the Power FMECs 17-16
Table 17-2 TL1 Pin Assignments 17-71
Table 17-3 Alarm Column Descriptions 17-75
Table 17-4 Color Codes for Alarms and Condition Severities 17-75
Table 18-1 STM-N Card Line Settings 18-9
Table 18-2 Optics Thresholds Settings 18-13
Table 18-3 Traffic Cards that Terminate the Line (LTEs) 18-19
Table 18-4 PPM Port Types 18-28
Table 18-5 Managing Domains 18-42
Table 19-1 Link Classes By Network Scope 19-13
Table 19-2 STM-N Maintenance Settings 19-14
Table 19-3 VLAN Settings 19-20
Table 19-4 LED Behavior During TCC2/TCC2P Reboot 19-55
Table 19-5 ONS 15454 SDH Cards Capable of J1 Path Trace 19-68
Table 19-6 HTML Commands for Formatting Legal Disclaimer 19-71