Procedures
xii
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
DLP-D126 View Near-End PM Counts 18-24
DLP-D127 View Far-End PM Counts 18-25
DLP-D129 Reset Current PM Counts 18-25
DLP-D131 Search for Circuits 18-26
DLP-D132 Provision a Multirate PPM on the MRC-12 Card 18-27
DLP-D133 Provision the Optical Line Rate on the MRC-12 Card 18-27
DLP-D134 Change the Optical Line Rate on the MRC-12 Card 18-28
DLP-D135 Delete a PPM from the MRC-12 or STM64-XFP Card 18-29
DLP-D136 Provision CE-100T-8 Ethernet Ports 18-30
DLP-D137 Provision a J1 Path Trace on STM-N Ports 18-31
DLP-D140 Change the Node Name, Date, Time, and Contact Information 18-32
DLP-D141 Provision CE-100T-8 and CE-1000-4 POS Ports 18-33
DLP-D142 Modify a Static Route 18-34
DLP-D143 Delete a Static Route 18-35
DLP-D144 Disable OSPF 18-36
DLP-D145 Change the Network View Background Color 18-36
DLP-D146 Print CTC Data 18-37
DLP-D147 Export CTC Data 18-38
DLP-D148 Create Domain Icons 18-40
DLP-D149 Manage Domain Icons 18-41
DLP-D150 Modify a 1:1 Protection Group 18-42
DLP-D151 Set Up SNMP for a GNE 18-43
DLP-D152 Modify a 1:N Protection Group 18-44
DLP-D153 Set Up SNMP for an ENE 18-45
DLP-D154 Modify a 1+1 Protection Group 18-46
DLP-D155 Delete a Protection Group 18-47
DLP-D157 Change the Node Timing Source 18-48
DLP-D158 Change User Password and Security Level on a Single Node 18-49
DLP-D159 Delete a User on a Single Node 18-50
DLP-D160 Change User Password and Security Level on Multiple Nodes 18-50
DLP-D161 Delete a User on Multiple Nodes 18-51
DLP-D162 Format and Enter NMS Community String for SNMP Command or Operation 18-52
DLP-D163 Delete SNMP Trap Destination 18-53
DLP-D165 Provision OSI Routing Mode 18-53
DLP-D166 Provision or Modify TARP Operating Parameters 18-55
To Next Page
Loading...
