Cisco ONS 15454 SDH - Page 713

20-29
Cisco ONS 15454 SDH Procedure Guide, R7.0
78-17194-01
Chapter 20 DLPs D300 to D399
DLP- D335 Install GBIC or SFP/XFP Devices
Step 1 Remove the GBIC, SFP, or XFP from its protective packaging.
Step 2 Check the label to verify that the GBIC, SFP, or XFP is the correct type for your network.
Table 20-8 shows the available GBICs.
Note The GBICs are very similar in appearance. Check the GBIC label carefully before installing it.
Table 20-9 shows the available SFPs/XFPs.
Table 20-8 Available GBICs
GBIC
Associated
Cards Application Fiber Product Number
1000BaseSX E1000-2-G
G1K-4
CE-1000-4
Short reach Multimode fiber up to 550 m
long
15454E-GBIC-SX=
15454-GBIC-SX
ONS-GC-GE-SX
1000BaseLX E1000-2-G
G1K-4
CE-1000-4
Long reach Single-mode fiber up to 5 km
long
15454E-GBIC-LX=
15454-GBIC-LX
ONS-GC-GE-LX
1000BaseZX G1K-4
CE-1000-4
Extra long
reach
Single-mode fiber up to
70 km long
15454E-GBIC-ZX=
15454-GBIC-ZX
ONS-GC-GE-ZX
— FC_MR-4 Long reach Single-mode fiber, 1310 nm ONS-GX-2FC-SML=
— FC_MR-4 Intermediate
reach
Multi-mode fiber, 850 nm ONS-GX-2FC-MMI=
Table 20-9 Available SFPs/XFPs
SFP
Associated
Cards Application Fiber Product Number
1000BaseSX ML1000-2 Short reach Multimode fiber up to 550 m
long
15454E-SFP-LC-SX
1000BaseLX ML1000-2 Long reach Single-mode fiber up to 5 km
long
15454E-SFP-LC-LX
1000BaseFX ML100X-8 Short reach 1310 nm multimode fiber up to
2 km long
ONS-SE-100-FX
1000BaseLX-10 ML100X-8 Intermediate
reach
1310 nm, single mode fiber, up
to 15 km long
ONS-SE-100-LX10
OC-48 SR MRC-12 Short reach 1310 nm single-mode fiber up
to 2 km long
ONS-SI-2G-S1
OC-48 IR1 MRC-12 Intermediate
reach
1310 nm single-mode fiber, up
to 15 km long
ONS-SI-2G-I1
OC-48 LR1 MRC-12 Long reach 1310 nm single-mode fiber up
to 40 km long
ONS-SI-2G-L1