Lucent Technologies CBX 3500 - Page 885

Index
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 Index-13
Beta Draft Confidential
description of, 12-4 to 12-7, B-1 to B-4
PCR CLP=0+1, Best Effort, B-4
PCR CLP=0+1, SCR CLP=0+1, MBS CLP=0+1,
B-8
PCR CLP=0+1, SCR CLP=0, MBS CLP=0, B-4
PCR CLP=0+1, SCR CLP=0, MBS CLP=0,
Tagging, B-6
PCR CLP=0, PCR CLP=0+1, B-2
PCR CLP=0, PCR CLP=0+1, Tagging, B-3
specifying for PVCs, 10-22
tagging option, 12-5
Traffic shaping
configuring, 5-16
description of, 5-16
Transmit scheduling, 4-35
Trunk backup
for B-STDX, 7-15
with APS and Fast APS 1+1, 7-29
Trunk Conditioning, I-1
Trunk hold down time, 7-23
Trunk logical ports
for ATM, 4-3, 4-4
Trunks
administrative cost, 7-2, 7-22, 8-45
ATM over MPLS, 8-1, 9-1
configuring, 7-1
defining, 7-17
deleting, 2-28
non-disruptive attributes, 2-25
Tuning
defining circuit reroute parameters, 21-21
See also PNNI reroute time tuning
Tunneling through networks, 17-25
Typical Circuit Emulation Application, I-1
U
UBR, see Unspecified bit rate
Unbind mapping, 21-37
UNI, see user-to-network interface
Unspecified bit rate (UBR), 12-3
back-pressure threshold, 6-13
traffic managed by FCP, 6-4
UPC, see Usage Parameter Control
Usage Parameter Control (UPC)
enabling on PVCs, 10-30, 10-63
UNI logical ports, 3-32, 4-24
User parts
SVC addresses, 17-67
User-to-network interface (UNI) logical ports
bandwidth policing, 4-24
B-STDX, 4-15 to 4-53
number of valid bits in VPI/VCI, 4-22, 4-23
CBX/GX
bandwidth, 3-21
policing, 3-31
configuring, 3-4, 4-14
DCE, 2-3
ILMI effect on, 2-5
maximum VPIs, 2-13
number of valid bits in VPI/VCI, 2-13, 3-30
UPC function, 3-32, 4-24
maximum VCIs, 2-13
V
Variable bit rate-real time/non-real time
(VBR-RT/NRT)
back-pressure threshold, 6-13
traffic managed by FCP, 6-4
VC Overload Control, 10-6 to 10-7
PVC Establishment Rate Control, 10-5
VCI, see virtual channel identifier
Virtual channel connection (VCC)
specifying, 10-17, 18-12, 18-33
Virtual channel identifier (VCI), 2-12 to 2-14,
3-30, 4-5, 4-22, 4-23
defined for interworking PVCs, 10-40
for ATM logical ports, 2-12
for GX 550, 10-2
for PVCs, 10-9, 10-10, 10-77
OPTimum frame trunks, 4-16
setting for ATM circuits, 10-50
setting valid bits, 4-5
Virtual channels
maximum allowed on UNI port, 2-13
on GX 550 BIO modules, 10-2
Virtual connection, 3-29