Index-12 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Index
Beta Draft Confidential
on IP logical ports, 9-34
S
Scope
configuring PNNI organizational scope, 17-31
Selectable statistics, 10-30, 10-64
Selecting endpoints
PMP leafs, 10-83
PMP roots, 10-72
PMP soft leaves, 18-38
Selective Discard (CLP1), 5-18
Selector (SEL), 16-5
Service name bindings
defining, 14-4
Set attributes option menu
for ATM logical ports, 4-11
Setting
logical port administrative parameters, 3-20,
9-22
logical port QoS parameters, 9-24
QoS attributes, 3-51, 9-23
Shaper
with CS/IWU PVC endpoints, 10-25, 10-59,
18-20
Signaling parameters, 17-3
Signaling tuning parameters, 17-13 to 17-15
UNI logical ports, 3-31
Static ARP entry
defining, 10-13
Subnet routing for Management VPI/VCI
defined, 11-2
Sustainable cell rate (SCR)
definition of, 12-5
PVCs, 10-24, 10-58, 10-79, 12-9, 18-18
SVC, see switched virtual circuit
Switched virtual circuits (SVCs)
address registration, 16-8
addresses
DCC, 17-60
E.164 AESA, 17-61
ICD, 17-60
native E.164, 17-59
user part, 17-67
anycast formats, 16-2
automatic assignment of ESI bytes, 17-55
configuring
logical ports for SVCs, 3-59
node prefixes, 17-30
port prefixes, 17-41 to 17-53
defining
addresses, 11-11 to 11-14, 17-55 to 17-64
call screening, 17-22
failure trap threshold, 17-5
hold down timer, 17-5
load balancing, 17-5
overview, 16-1
QoS, 3-59
routing determination, 16-10
tunneling, 17-25
user part, 17-67
T
T1 modules (CBX)
minimum cell rate (MCR) class, D-8 to D-9
Tables
buffer threshold, 6-8
rate profile, 6-8
Tagging, 12-5
Technical, xlvii
Templates
for ATM logical ports, 2-24
for circuits, 10-92
Terminating cells, 5-6
BCM cells, 5-12
CCRM cells, 5-9
Thresholds
buffer, 6-8
CLP+1, 6-12
CLP0+1, 6-13
EFCI, 6-13
FCP UBR back pressure, 6-13
FCP VBR back pressure, 6-13
Global Discard buffer, 6-13
Multicast Discard, 6-4
Traffic descriptors
best effort option, 12-5
To Next Page
Loading...
