CHAPTER
5-1
Cisco ONS 15454 DWDM Reference Manual, R8.5
78-18343-02
5
Multiplexer and Demultiplexer Cards
This chapter describes legacy multiplexer and demultiplexer cards used in Cisco ONS 15454 dense
wavelength division multiplexing (DWDM) networks. For installation and card turn-up procedures, refer
to the Cisco ONS 15454 DWDM Procedure Guide. For card safety and compliance information, refer to
the Cisco Optical Transport Products Safety and Compliance Information document.
Note Unless otherwise specified, “ONS 15454” refers to both ANSI and ETSI shelf assemblies.
Chapter topics include:
• 5.1 Card Overview, page 5-1
• 5.2 Safety Labels, page 5-8
• 5.3 32MUX-O Card, page 5-12
• 5.4 32DMX-O Card, page 5-16
• 5.5 4MD-xx.x Card, page 5-20
Note For a description of the 32DMX, 32DMX-L, 40-DMX-C, 40-DMX-CE, 40-MUX-C, 40-WSS-C,
40-WSS-CE, and 40-WXC-C cards, refer to Chapter 7, “Reconfigurable Optical Add/Drop Cards.”
5.1 Card Overview
The card overview section contains card summary, compatibility, interface class, and channel allocation
plan information for legacy multiplexer and demultiplexer cards.
Note Each card is marked with a symbol that corresponds to a slot (or slots) on the ONS 15454 shelf assembly.
The cards are then installed into slots displaying the same symbols. See the “1.16.1 Card Slot
Requirements” section on page 1-61 for a list of slots and symbols.
To Next Page
Loading...
Need help?
General
