Cisco ONS 15454 DWDM - Node View (Single-Shelf Mode) or Shelf View (Multishelf Mode) Tabs

12-15
Cisco ONS 15454 DWDM Reference Manual, R8.5
78-18343-02
Chapter 12 Cisco Transport Controller Operation
12.5.3 Network View
12.5.3 Network View
Network view allows you to view and manage ONS 15454s that have DCC connections to the node that
you logged into and any login node groups you have selected (Figure 12-7).
Inventory Provides inventory information (part number,
serial number, and CLEI codes) for cards
installed in the single-shelf or multishelf node.
Allows you to delete and reset cards and change
the card service state.
Note Each card has bootstrap and boot code.
After the card is upgraded using the boot
code upgrade procedure, the bootstrap
version is displayed in the Inventory tab
in CTC; However, the boot code version
is not displayed in the Inventory tab.
—
Maintenance Performs maintenance tasks for the single-shelf
or multishelf node.
Single-shelf mode: Database,
Network, OSI, Software,
Diagnostic, Audit, DWDM
Multishelf mode: Protection,
Overhead XConnect, Diagnostic,
Timing
Table 12-9 Node View (Single-Shelf Mode) or Shelf View (Multishelf Mode) Tabs and Subtabs
Tab Description Subtabs