Cisco ONS 15454 DWDM - A.3.1 TCC2 Card Specifications

A-8
Cisco ONS 15454 DWDM Reference Manual, R8.5
78-18343-02
Appendix A Hardware Specifications
A.3.1 TCC2 Card Specifications
A.3.1 TCC2 Card Specifications
The TCC2 card has the following specifications:
• CTC software
– Interface: EIA/TIA-232 (local craft access, on TCC2 faceplate)
– Interface: 10BaseT LAN (on TCC2 faceplate)
– Interface: 10BaseT LAN (through the backplane)
• Synchronization
– Stratum 3, per Telcordia GR-253-CORE
– Free running access: Accuracy +/– 4.6 ppm
– Holdover stability: 3.7 x 10
-7
per day including temperature (< 255 slips in first 24 hours)
– Reference: External BITS, line, internal
• Supply voltage monitoring
– Both supply voltage inputs are monitored.
– Normal operation: –40.5 to –56.7 V
– Undervoltage: Major alarm
– Overvoltage: Major alarm
• Dimensions
– Height: 12.650 in. (321.3 mm)
– Width: 0.921 in. (23.4 mm) (The dimension of the finger gasket is not included)
– Depth: 9.000 in. (228.6 mm)
– Depth with backplane connector: 235 mm (9.250 in.)
– Weight not including clam shell: 0.7 kg (1.5 lb)
A.3.2 TCC2P Card Specifications
The TCC2P card has the following specifications:
• CTC software
– Interface: EIA/TIA-232 (local craft access, on TCC2P faceplate)
– Interface: 10BaseT LAN (on TCC2P faceplate)
– Interface: 10BaseT LAN (through the backplane)
• Synchronization
– Stratum 3, per Telcordia GR-253-CORE
– Free running access: Accuracy +/– 4.6 ppm
– Holdover stability: 3.7 * 10 exp – 7 per day including temperature (< 255 slips in first 24 hours)
– Reference: External BITS, line, internal
• Supply voltage monitoring
– Both supply voltage inputs are monitored.