Cisco ONS 15454 DWDM - Table 9-10 Multishelf Four-Degree Mesh Node User-Defined Layout Example; Table 9-8 Multishelf Eight-Degree Mesh Node Layout Example; Table 9-9 Multishelf Four-Degree Mesh Node Upgrade Layout Example

9-29
Cisco ONS 15454 DWDM Reference Manual, R8.5
78-18343-02
Chapter 9 Node Reference
9.3.3 Optical Side Configurations
Table 9-9 shows another eight-degree mesh node. In the example, Sides A through H are assigned to
Slots 1 through 6 in all shelves (Shelves 1 through 8). 40-WXC-C cards in line termination mode are
installed in Sides A through H.
Table 9-10 shows a four-degree mesh node with a user-defined side. Because the software assigns sides
consecutively, and because the mesh node is four-degrees, the side assigned to Shelf 5, Slots 1 through 6
is “Unknown.”
5WXC Line
Termination
H TXP/MXP —
6 TXP/MXP — TXP/MXP —
7 TXP/MXP — TXP/MXP —
8 TXP/MXP — TXP/MXP —
Table 9-8 Multishelf Eight-Degree Mesh Node Layout Example (continued)
Shelf Slots 1–6 Side Slots 12–17 Side
Table 9-9 Multishelf Four-Degree Mesh Node Upgrade Layout Example
Shelf Slots 1–6 Side Slots 12–17 Side
1WXC Line
Termination
A TXP/MXP —
2WXC Line
Termination
B TXP/MXP —
3WXC Line
Termination
C TXP/MXP —
4WXC Line
Termination
D TXP/MXP —
5WXC Line
Termination
E TXP/MXP —
6WXC Line
Termination
F TXP/MXP —
7WXC Line
Termination
G TXP/MXP —
8WXC Line
Termination
H TXP/MXP —
Table 9-10 Multishelf Four-Degree Mesh Node User-Defined Layout Example
Shelf Slots 1–6 Side Slots 12–17 Side
1WXC Line
Termination
A TXP/MXP —
2 TXP/MXP — WXC Line
Termination
C
1
3WXC Line
Termination
D TXP/MXP —