A-15
Cisco ONS 15454 DWDM Reference Manual, R8.5
78-18343-02
Appendix A      Hardware Specifications
A.5.2    OPT-BST Amplifier Card Specifications
 • Dimensions
 –
Height: 12.65 in. (332 mm)
 –
Width: 0.921 in. (23.4 mm) (The dimension of the finger gasket is not included)
 –
Depth: 9.00 in. (240 mm)
A.5.2 OPT-BST Amplifier Card Specifications
The OPT-BST amplifier card has the following specifications:
 • Optical characteristics:
 –
Total operating wavelength range: 1530 to 1561.3 nm
 –
Gain ripple (peak to valley): 1.5 dB
 –
Gain range: 5 to 20 dBm with programmable gain tilt
 –
Gain and power regulation over/undershoot: 0.5 dB
 –
Limited maximum output power: 17.5 dBm
 –
Maximum output power (with full channel load): 17 dB
 –
Minimum output power (with one channel): –1 dBm
 –
Input power (Pin) range at full channel load: –3 to 12 dBm
 –
Input power (Pin) range at single channel load: –21 to –6 dBm
 –
Noise figure at G
3 
20 dB = 6 dB
 –
OSC filter drop (channels) insertion loss maximum: 1 dB
 –
OSC filter drop (OSC) insertion loss maximum: 1.8 dB
 –
OSC filter add (OSC) insertion loss maximum: 1.3 dB
 –
Optical connectors: LC-UPC/2
 • Dimensions
 –
Height: 12.65 in. (332 mm)
 –
Width: 0.921 in. (23.4 mm) (The dimension of the finger gasket is not included)
 –
Depth: 9.00 in. (240 mm)
A.5.3 OPT-BST-E Amplifier Card Specifications
The OPT-BST-E amplifier card has the following specifications:
 • Optical characteristics:
 –
Total operating wavelength range: 1530 to 1561.3 nm
 –
Gain ripple (peak to valley): 1.8 dB
 –
Gain range: 8 to 23 dB with programmable gain tilt
 –
Extended gain range: 23 to 26 dB with gain tilt uncontrolled
 –
Gain and power regulation over/undershoot: 0.5 dB
 –
Limited maximum output power: 20.5 dBm