13-2
Cisco ONS 15454 DWDM Reference Manual, R8.5
78-18343-02
Chapter 13 Security Reference
13.2 User Privileges and Policies
Note Maintenance, Provisioning, and Superusers must be properly trained on the hazards of laser safety and
be aware of safety-related instructions, labels, and warnings. Refer to the Cisco Optical Products Safety
and Compliance Information document for a current list of safety labels and warnings, including laser
warnings. Refer to IEC 60825-2 for international laser safety standards, or to ANSI Z136.1 for U.S. laser
safety standards. The Cisco ONS 15454 DWDM Procedure Guide explains how users can disable laser
safety during maintenance or installation; when following these procedures, adhere to all posted
warnings and cautions to avoid unsafe conditions or abnormal exposure to optical radiation.
13.2 User Privileges and Policies
This section lists user privileges for each CTC task and describes the security policies available to
Superusers for provisioning.
13.2.1 User Privileges by CTC Task
Table 13-1 shows the actions that each user privilege level can perform in node view.
Table 13-1 ONS 15454 Security Levels—Node View
CTC Tab Subtab [Subtab]:Actions Retrieve Maintenance Provisioning Superuser
Alarms — Synchronize/Filter/Delete
Cleared Alarms
XXXX
Conditions — Retrieve/Filter X X X X
History Session Filter X X X X
Node Retrieve/Filter X X X X
Circuits Circuits Create/Edit/Delete — — X X
Filter/Search X X X X
Rolls Complete/ Force Valid Signal/
Finish
—— X X
To Next Page
Loading...
Need help?
General
