Cisco ONS 15454 DWDM - Appendix A Hardware Specification

A-2
Cisco ONS 15454 DWDM Reference Manual, R8.5
78-18343-02
Appendix A Hardware Specifications
A.1.2 Configurations
• SONET/SDH plane bandwidth: 80 Gbps
A.1.2 Configurations
The ONS 15454 can be configured for the following dense wavelength division multiplexing (DWDM)
topologies:
• Hubbed rings
• Multihubbed rings
• Point-to-point
• Linear
• Linear with optical add/drop multiplexing (OADM)
• Hybrid terminal node
• Hybrid OADM node
• Hybrid line amplifier node
A.1.3 Cisco Transport Controller
CTC, the ONS 15454 craft interface software, has the following specifications:
• 10BaseT Ethernet
• TCC2/TCC2P card access: RJ-45 connector
• Backplane access: LAN pin field (ANSI only)
• Front Mount Electrical Connection (FMEC) access: LAN connector on MIC-C/T/P faceplate (ETSI
only)
A.1.4 External LAN Interface
The ONS 15454 external LAN interface has the following specifications:
• 10BaseT Ethernet
• Backplane access: LAN pin field (ANSI only)
• FMEC access: LAN connector on MIC-C/T/P faceplate (ETSI only)
A.1.5 TL1 Craft Interface
The ONS 15454 TL1 craft interface has the following specifications:
• Speed: 9600 bps
• TCC2/TCC2P access: EIA/TIA-232 DB-9 type connector
• Backplane access: CRAFT pin field (ANSI only)