Cisco ONS 15454 DWDM Reference Manual

A-54
Cisco ONS 15454 DWDM Reference Manual, R8.5
78-18343-02
Appendix A Hardware Specifications
A.9.4 MXP_MR_2.5G and MXPP_MR_2.5G Card Specifications
• Line (client side)
– Bit rate: 8 Mbps to 2.488 Gbps
– Code: Scrambled NRZ
– Fiber: Based on SFP (1310-nm single-mode or 850-nm multimode)
– Maximum chromatic dispersion allowance: Based on SFP
– Loopback modes: Terminal and facility
– Connectors: LC
• Transmitter (client side)
– Maximum transmitter output power: –1 dBm
– Minimum transmitter output power: –6 dBm
– Center wavelength: Based on SFP
– Nominal wavelength: Based on SFP
– Transmitter: Based on SFP
• Receiver (client side)
– Maximum receiver level: –1 dBm at BER 1 * 10 exp – 12
– Minimum receiver level: –14 dBm at BER 1 * 10 exp – 12
– Receiver: APD
– Link loss budget: 8 dB minimum, at BER = 1 * 10 exp – 12
– Receiver input wavelength range: 850nm to 1605 nm
• Dimensions
– Height: 12.650 in. (321.3 mm)
– Width: 0.921 in. (23.4 mm) (The dimension of the finger gasket is not included)
– Depth: 9.000 in. (228.6 mm)
– Depth with backplane connector: 9.250 in. (235 mm)
– Weight not including clam shell: 3.1 lb (1.3 kg)
A.9.4 MXP_MR_2.5G and MXPP_MR_2.5G Card Specifications
The MXP_MR_2.5G and MXPP_MR_2.5G cards have the following specifications:
• Payload configuration
– FC1G—Fibre Channel 1.06 Gbps
– FC2G—Fibre Channel 2.125 Gbps
– FICON1G—Fiber connectivity 1.06 Gbps (IBM signal)
– FICON2G—Fiber connectivity 2.125 Gbps (IBM signal)
– ESCON—Enterprise System Connection 200 Mbps
– ONE_GE—One Gigabit Ethernet 1.125 Gbps

Cisco ONS 15454 DWDM Specifications

General

Chassis Type	DWDM
Form Factor	Rack-mountable
Slots	17
Storage Temperature	-40 to 158°F (-40 to 70°C)
Relative Humidity	5% to 95% non-condensing
Power Supply	AC or DC
Cooling	Internal fans
Operating Temperature	23 to 104°F (-5 to 40°C)
Altitude	0 to 6500 ft (0 to 1981 m)
Safety Compliance	EN 60950-1
EMI Compliance	FCC Part 15