Cisco ONS 15454 SDH - Page 837

Index
IN-5
Cisco ONS 15454 SDH Procedure Guide, R6.0
78-17194-01
CLETOP, cleaning fiber connectors with 19-4
clock
changing time 18-33
setting 4-5
closing
CTC A-5
FMEC cover 1-17
coaxial cables, installing 20-17
color
changing for active and standby spans 19-28
modifying background in network view 18-36
common control cards
See also TCC2 card
See also TCC2P card
See also XC-VXC-10G card
See also XC-VXL-10G card
See also XC-VXL-2.5G card
installing 2-2
switch test 19-59
conditions
checking for on the network 19-83
modifying filtering parameters 21-12
viewing 9-2, 18-16
viewing by time zone 18-15
viewing history 21-4
configurations. See networks
configuring
CTC alerts dialog box 17-20
node for RADIUS authentication 18-5
connecting
office ground 17-13
office power 17-15
connectors, installing in STM-N cards 2-7 to 2-10
converting. See upgrading
CORBA 17-57
corporate LAN 3-5
craft pin connections, wiring 1-15
creating
1+1 protection group 17-64
1:1 protection group 17-62
1:N protection group 17-63
alarm severity profiles 9-6, 21-6
circuit for an E-Series port-mapped card 6-75
DCC tunnel 20-66
domain icons 18-40
E-Series EtherSwitch circuit 6-72
E-Series hub-and-spoke Ethernet configuration 6-80
E-Series multicard EtherSwitch manual
cross-connect
6-85
E-Series shared packet ring Ethernet circuit 6-77
E-Series single-card EtherSwitch manual
cross-connect
6-82
four-fiber MS-SPRings 17-11, 17-22
half circuit 6-68, 6-70
high-order circuits 6-55, 6-60, 6-63
IP-encapsulated tunnel 17-3
IP-over-CLNS tunnel 18-62
J1 or J2 path trace 7-8
logical network map 5-43
login node groups 17-51
low-order aggregation point 6-50
low-order circuits 6-7, 6-12, 6-15, 6-19, 6-24, 6-27, 6-31,
6-35, 6-38
low-order path tunnel for port grouping 6-47
low-order tunnels 6-42, 6-45
manual cross-connect for G-Series or E-Series
port-mapped card
6-90
MS-SPRing 5-13, 19-45
new user 17-65, 17-66
overhead circuits 6-96
protection groups 4-10
provisionable patchcords 17-31
RMON thresholds 8-5, 8-6, 21-28, 21-40
static route 17-56
STM test circuits 6-103
two-fiber MS-SPRing 21-44, 21-46
user data channel circuit 19-9
VCAT circuits 6-97, 6-101
VLAN for Ethernet circuits 6-81, 6-84