Index-6 ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000
Index
Beta Draft Confidential
offnet PVCs over PNNI, 21-55
overview, 10-41
Frame Relay to ATM Service Interworking (FRF.8)
overview, 10-40
traffic parameter conversion, 10-47
Frame Relay-to-PNNI interworking, 21-19
Frame User-to-Network Interface (FUNI)
described, 4-8
Frequently asked questions, ATM Flow Control
Processor (FCP), 6-14 to 6-18
FRF.10 Implementation Agreement, 15-4
FRF.4 Implementation Agreement, 15-2
FUNI, see Frame User-to-Network Interface
G
Gateway addresses
setting for port prefixes, 17-49
Generating cells, 5-6
BCM cells, 5-11
CCRM cells, 5-9
Global thresholds
CLP0+1, 5-16
congestion, 5-16
discard, 5-16
Graceful discard, 10-46
H
High-Order Domain-Specific Part (HO-DSP), 16-5
I
I/O modules
for ATM, 4-7
ICD, see international country designator
ICR, see Initial Cell Rate
IDI, see initial domain identifier
Idle VC factor, 5-14
IE sig overide mask, 17-26
ILMI, see Interim Link Management Interface
IMA groups
minimum cell rate (MCR) class, D-18
Ingress address translation
disabling, 17-24
tunnelling option, 17-24
Initial Cell Rate (ICR)
constant, 5-13, 5-16, 6-4
Initial domain identifier (IDI), 16-5
Initial domain part (IDP), 16-4
Interim Link Management Interface (ILMI)
DTE prefix screen mode, 3-36
effect on port behavior, 2-5
eligible prefixes, 16-8
enabling support, 3-35
loss threshold, 2-5, 3-35, 4-27
polling period, 2-5, 3-35, 4-27
VCC trap support, 2-6, 3-35, 4-26
VCI for polling, 4-27
VPI for polling, 4-27
International country designator (ICD)
address format, 16-6
port prefixes, 17-44
SVC addresses, 17-60
Intra-card APS, 7-11
IntServ profiles
configuring, 9-10 to 9-12
IP interface address, 9-38
IP logical ports
configuring, 9-32 to 9-33
J
Juniper routers, 8-1
JUNOS, 8-1
K
Keep Alive threshold
configuring, 7-22, 8-45
overview, 7-3
To Next Page
Loading...
