Index
ATM Services Configuration Guide for CBX 3500, CBX 500, GX 550, and B-STDX 9000 Index-5
Beta Draft Confidential
FCP profile values, D-2
DiffServ profiles
configuring, 9-13 to 9-15
Direct trunk logical ports, 2-10
Direction (DIR) indicator, 5-9
Discard mechanisms
CLP1, 5-18
EPD, 5-18
PPD, 5-18
Discard/Congestion mapping, 4-47
Displaying
connection on the map, 7-46
DLCI, see data link connection identifier
Domain Specific Part, 16-5
Downloading
buffer threshold tables, 6-8
rate profile tables, 6-8
DS3 IOM minimum cell rate (MCR) class, D-4 to
D-7
DTE, see data terminal equipment
E
E.164 address format, 19-2, 20-2
E.164 addresses
AESA format, 16-6
AESA port prefixes, 17-45
AESA SVC addresses, 17-61
translating, 17-25
Early packet discard (EPD), 5-18, 6-18
support, 10-32
Egress address translation
disabling, 17-25
tunnel option, 17-25
E-LSP, 9-13
E-LSP-IntServ, 9-11
E-LSP-IntServJ, 9-11
End system identifier (ESI)
automatically assigning, 17-55
byte assignments, 17-55
definition, 16-5
End-to-End Delay
for PVC routing, 10-19, 10-51
EPD, see early packet discard
ESI, see end system identifier
Excess burst size (Be), 10-56
Explicit forward congestion indication (EFCI)
bit check, 6-12
threshold, 6-13
Explicit forward congestion indicator (EFCI)
mapping, 10-65
Extended QoS parameters, 10-32
External device object
adding, 7-42
External route aggregates
VNN OSPF, 7-51
F
Failure trap threshold
for SVCs, 17-5
Fast Inter-card APS 1+1
GX 550 PNNI interworking
configuring, 7-36
overview, 7-12
supported modules, 7-12
Fault tolerant PVCs
activating a backup port, 14-6
configuring circuits for, 10-15
configuring logical ports for, 14-1
defining the service name bindings, 14-4
for UNI DCE logical ports, 3-18, 4-17
FCP, see ATM Flow Control Processor
Flooding, of LSAs
standard, 7-57
VNN OSPF optimized, 7-57 to 7-60
Flow Control Processor, see ATM Flow Control
Processor
Frame discard, 10-32, 17-6
Frame Relay
Implementation Agreements
FRF.10 (NNI SVCs), 15-4
FRF.4 (SVCs), 15-2
QoS for SVCs, 3-59
Frame Relay to ATM interworking
configuring circuits for, 10-40
Frame Relay to ATM Network Interworking
(FRF.5)