Cisco ONS 15454 DWDM Reference Manual

Index
IN-22
Cisco ONS 15454 DWDM Reference Manual, R8.5
78-18343-02
description 3-8
faceplate 3-10
fiber cut scenario 10-22
LEDs 3-13
PM parameters 17-19
PM read points 17-19
port-level indicators 3-13
power monitoring 3-12
power requirements A-6
safety labels 3-2
service state transitions B-4
specifications A-13
summary 3-2
OSCM card
ALS 10-19
compatibility 3-2
description 3-4
faceplate 3-6
LEDs 3-7
PM parameters 17-19
PM read points 17-19
port-level indicators 3-8
power monitoring 3-7
power requirements A-6
safety labels 3-2
service state transitions B-4
specifications A-13
summary 3-2
OSC regeneration node
cabling 9-48
description 9-17
even band management 10-37
OSI
and MSTP 15-46 to 15-49
networking and TCP/IP 15-45
overview 15-45
OSNR, network applications 10-2
OSPF
alternative to static routes 15-8
in DCNs 15-23
IP addressing scenario 15-10
IP networking overview 15-2
OTDR 10-17
OTN layer
PM parameters 17-12
provisioning PM parameters 17-11
trunk-side PMs 17-13
OTN PM window 17-10
OXC node. See LMP
P
patchcords
displaying information in DWDM functional
view
9-67
internal and provisionable 11-1
patch panel
eight-degree 9-35
four-degree 9-35
patch-panel tray
(40-channel) 1-45
deep (32-channel) 1-44
eight degree 1-47
four degree 1-47
managing fiber with 1-43
mesh 1-46
standard (32-channel) 1-44
path overhead, clocking differences 17-29
path protection, ADM-10G card circuit protection 8-73
Payload PM window 17-5
PCM 2-13
PC setup
CTC software installation 12-3
requirements 12-4
performance, optical 10-9
performance monitoring
10GE parameter definitions 17-23
8b10b parameter definitions 17-20

Cisco ONS 15454 DWDM Specifications

General

Chassis Type	DWDM
Form Factor	Rack-mountable
Slots	17
Storage Temperature	-40 to 158°F (-40 to 70°C)
Relative Humidity	5% to 95% non-condensing
Power Supply	AC or DC
Cooling	Internal fans
Operating Temperature	23 to 104°F (-5 to 40°C)
Altitude	0 to 6500 ft (0 to 1981 m)
Safety Compliance	EN 60950-1
EMI Compliance	FCC Part 15