Cisco ONS 15454 SDH - Page 846

Index
IN-14
Cisco ONS 15454 SDH Procedure Guide, R6.0
78-17194-01
port grouping 6-47
M
maintaining the air filter 15-2
managing
OSI information 15-8
TARP data cache 18-71
managing domain icons 18-41
manual routing 19-39
map (network) 19-73, 21-24
measuring voltage 17-26
members (VCAT)
adding 17-67
changing service state 17-72
deleting 17-69
merging circuits 7-11
MetroPlanner, importing a configuration file 20-81
MIB 21-29, 21-41, 21-42
MIC-A/P 20-12
MIC-C/T/P
clock connector pin assignments 20-15
installing LAN wires on 20-16
installing the TL1 craft interface on 17-70
installing timing cables on 20-15
ML1000-2 card. See ML-Series Ethernet cards
ML100T-12 card. See ML-Series Ethernet cards
ML100X-8 card. See ML-Series Ethernet cards
ML-Series Ethernet cards
Cisco IOS command line interface A-7
creating manually routed VCAT circuits 6-101
creating VCAT circuits 6-97
installing 2-11
installing SFPs 20-28
monitoring performance 8-4
routing fiber on 2-19
viewing Ethernet port PM parameters 20-56
viewing POS port PM parameters 20-57
modifying
See also changing
1+1 protection group 18-46
1:1 protection group 18-42
1:N protection group 18-44
AIC-I card settings 10-3
alarm, condition, and history filtering
parameters
21-12
alarm severity filters 9-7
card protection settings 11-5
card service state 10-5
circuits 7-4
circuit state 19-26
DCC terminations 11-5
FC_MR-4 card line settings 10-5
FC_MR-4 card PM parameter thresholds 10-5
line and threshold settings 20-39 to 20-53
maximum number of session entries for alarm
history
18-14
MIC-C/T/P port IP settings 17-79
MS-DCC terminations 20-65
MS-SPRing IDs or reversion times 13-18
MS-SPRing node ID 17-19
network view background color 18-36
node name, date, time, and contact information 18-32
node settings 11-1 to 11-8
node timing 11-6, 15-18, 18-48
optics thresholds for STM-64 and MRC-12
cards
18-12
OSI provisioning 11-3
overhead circuits 7-4
performance monitoring display 8-2
PPM service state 10-5
provisional patchcords 11-5
RS-DCC termination 20-65
SDH threshold settings for STM-N cards 20-54
security 11-7
SNMP trap destination 19-77
span color for active and standby 19-28
static route 18-34
STM-N card line settings 10-2, 18-9