EasyManua.ls Logo

Cisco ONS 15454 SDH - Page 847

Cisco ONS 15454 SDH
860 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Index
IN-15
Cisco ONS 15454 SDH Procedure Guide, R6.0
78-17194-01
STM-N card PM parameter thresholds 10-2
TARP operating parameters 18-55
tunnel type 17-24
user password and security 18-49, 18-50
users 11-7
VCAT member service state 17-72
module. See card
Molex 96-pin LFH connectors 20-20
monitor circuits, creating 7-5
monitoring
electrical cards and ports 8-3
Ethernet cards and ports 8-4
FC_MR-4 cards and ports 8-6
performance. See performance monitoring
PM counts for a selected signal 21-34
STM-N cards and ports 8-5
mounting shelf assembly in rack
multiple shelves 17-7
one person 17-4
two people 17-6
MRC-12 cards
changing optical thresholds 18-12
deleting PPMs from 18-29
fiber clips 2-19, 18-3
installing SFPs/XFPs on 20-28
maximum bandwidth 2-9
provisioning multirate PPMs on 18-27
provisioning optical line rate on 18-27, 18-28
MRC-12 cards. See also STM-N cards
MS-DCC. See DCC
MS-SPRing
acceptance test, four-fiber 5-16
acceptance test, two-fiber 5-14
adding a node 14-2
changing a node ID 17-19
choosing properties 5-13
converting from an SNCP to a two-fiber 13-14
creating 5-13, 17-22, 19-45, 21-44, 21-46
creating a half circuit 6-68
disabling the ring 18-83
DRI 5-18, 5-21
exercise span. See external switching commands
Force switch. See external switching commands
four-fiber acceptance test 5-16
installing fiber optic cables for 20-37
lockout. See external switching commands
Manual switch. See external switching commands
modifying IDs or reversion times 13-18
MS-SPRing wizard 17-11
provisioning 5-10, 5-18, 5-30, 5-32, 20-5
provsioning 5-21
remapping the K3 byte 17-83
removing a node 14-7
revertive switching 13-7, 13-13, 17-12, 21-45
subtending 5-39, 5-40, 5-41
switch test 17-84
testing 17-89, 19-15
two-fiber, acceptance test 5-14
upgrading 12-7, 13-16, 19-78, 19-79
upgrading to 13-6, 13-12
verifying extension byte mapping 20-81
verifying fiber connections 5-10
verifying timing after dropping a node 18-82
viewing the squelch table 20-80
multiplex-section data communications channel. See DCC
N
navigating using the toolbar A-6
NE defaults. See network element defaults
Netscape Navigator
disabling proxy service 17-48
logging in 17-49
testing the node connection 17-46
network access, setting up 4-7
network discovery, upgrades during 3-7
network element defaults
editing 15-25

Table of Contents

Other manuals for Cisco ONS 15454 SDH

Related product manuals