CMS32L051 User Manual | FLASH Control
www.mcu.com.cn 696 / 703
27.3 Registers for controlling FLASH
The registers that control FLASH are as follows:
⚫ Flash write protection register (FLPROT).
⚫ Flash operation control register (FLOPMD1, FLOPMD2).
⚫ Flash erase mode control register (FLERMD)
⚫ Flash status register (FLSTS).
⚫ Flash full-chip erase time control register (FLCERCNT).
⚫ Flash sector erasure time control register (FLSERCNT).
⚫ Flash write time control register (FLPROCNT).
⚫ Flash mode time control register (FLNVSCNT/FLPRVCNT/FLLERVCNT).
27.3.1 Flash write protection register (FLPROT)
Flash protection registers are used to protect FLASH operating control registers.
Address: 0x40020020 After reset: 00000000H R/W
symbol
FLPROT
To Next Page
Loading...