CMS32L051 User Manual | FLASH Control
www.mcu.com.cn 700 / 703
27.3.7 Flash write time control register (FLPROCNT).
The FLPROCNT register allows you to set the FLASH WORD write time.
Address: 0x4002001C After reset: Indefinite R/W
symbol
FLPROCNT
Note: When the master clock is an internal high-speed OCO or an external input clock <=20M, the
hardware setting time can be used without setting FLPROCNT.
Note: When the master clock is an internal high-speed OCO or an external input clock <=20M, the
hardware setting time can be used and the FLPGSCNT is not set.
To Next Page
Loading...