Choosing the SongBook Entries |109
Choosing the SongBook Entries by Song Number
You can select a SongBook Entry by entering its unique Song ID Number.
Numbers associated with each Entry can be programmed in any of the
SongBook > Book Edit pages. (See Editing the Song Selection Number on
page 166 for more information).
1 To see the numbers while in the Book page, choose the Show Song Numbers
(now Key) command from the page menu, to let the Num column appear.
2 To select a SongBook Entry by entering its ID number, press the SONGBOOK
button again while you are in any page of the SongBook. The numeric key-
pad will appear, allowing you to enter the ID number corresponding to the
desired Entry.
3 To see the Key column again, select the Show Key (now Song Numbers)
command from the page menu.
Choosing the SongBook Entries via MIDI
SongBook Entries can be remotely selected via MIDI. In addition, MIDI mes-
sages can be sent via MIDI when choosing a SongBook Entry. This is useful
to synchronize Havian 30 to an external editor or digital music sheet reader.
Setting the special Control MIDI channel
A special MIDI channel used as the Control channel is needed to send MIDI
messages to select the SongBook Entries, or to receive MIDI messages when
selecting them.
Configure the Control channel
1 Go to the Global > MIDI > General Controls page and choose a MIDI Preset
where to save your settings.
2 Go to the Global > MIDI > Midi In Channel page, and assign the Control op-
tion to one of the sixteen available MIDI channels (usually one of the higher-
numbered ones, for example 16).
To Next Page
Loading...
Need help?
General
