716| Managing files
Restoring the original musical resources
After an OS update, or when you want to erase all changes to your Factory
and User data, and restore your Havian 30 to the same condition it was when
new, use the Factory Restore operation.
Warning: This command deletes all data from memory (including your custom data).
1 Go to the Media > Utility page.
2 Select the Factory Restore option, then touch the Execute button.
3 A dialog box will appear, with a list of types of data to be restored. Only check
the types of data you want to restore.
Warning: This command will delete from the internal memory all types of data se-
lected in this dialog box (including your custom data).
4 When done, a message will appear, asking you to restart the instrument
(‘Data Restored. Please switch off’). Turn the instrument off, then turn it on
again.
To Next Page
Loading...
Need help?
General
