Korg HAVIAN 30 User Manual

454| Effects for the MIDI Sounds
29: St. Biphase Mod. (Stereo Biphase Modulation)
This stereo chorus effect adds two different LFOs together. You can set the
Frequency and Depth parameters for each LFO individually. Depending on
the setting of these LFOs, very complex waveforms will create an analog-
type, unstable modulated sound.
Chorus/Flanger
Left
Right
Feedback
180 [degree]
FX Amt
FX Amt
High Damp
Stereo In - Stereo Out
LFO1: Tri / Sine
LFO2: Tri / Sine
Chorus/Flanger
High Damp
a LFO1 Waveform Triangle, Sine Selects LFO1 waveform
LFO2 Triangle, Sine Selects LFO2 waveform
Phase Sw 0 deg,
180 deg
Switches the LFO phase difference
between left and right
b LFO1 Frequency [Hz] 0.02…30.00 Sets the LFO1 speed
Src Of f…Tempo Selects the modulation source of
LFO1&2 speed
LFO1 Amt –30.00…
+30.00
Sets the modulation amount of
LFO1 speed
c LFO2 Frequency [Hz] 0.02…30.00 Sets the LFO2 speed
Amt –30.00…
+30.00
Sets the modulation amount of
LFO2 speed
d Depth1 0 …10 0 Sets the depth of LFO1
modulation
Src Of f…Tempo Selects the modulation source of
LFO1&2 modulation depth
Amt –100…+100 Sets the modulation amount of
LFO1 modulation depth
e Depth2 0…10 0 Sets the depth of LFO2
modulation
Amt –100…+100 Sets the modulation amount of
LFO2 modulation depth

Korg HAVIAN 30 Specifications

General

Brand	Korg
Model	HAVIAN 30
Category	Musical Instrument
Language	English