490| Effects for the MIDI Sounds
a: Type
a: LFO Phase [degree]
Select the type of phaser LFO and tremolo LFO for the “Type” parameter.
How the effect sound moves or rotates depends on the type of LFO. Select-
ing “LFO Phase” enables you to offset the timing of the phaser peak and
control a subtle movement and rotation of the sound.
f: Phaser Wet/Dry
i: Wet/Dry
PHASER Wet/Dry sets the balance between the phaser output and the dry
sound. OUTPUT Wet/Dry sets the balance between the final phaser and
tremolo output level and the dry sound.
49: St. Ring Modulator (Stereo Ring Modulator)
This effect creates a metallic sound by applying the oscillators to the input
signal. Use the LFO or Dynamic Modulation to modulate the oscillator to cre-
ate a radical modulation. Matching the oscillator frequency with a note num-
ber will produce a ring modulation effect in specific key ranges.
Left
Right
FX Amt
FX Amt
Stereo In - Stereo Out
Pre LPF
Ring Modulator
Pre LPF
Ring Modulator
Note No.
OSC Mode
Fixed
Note (Key Follow)
Fixed Frequency
Pitch
Note Offset, Fine
Sine Oscillator
LFO
To Next Page
Loading...
Need help?
General
