392| Writing the Sounds
34 Writing the Sounds
Writing the edited Sound
After editing, you can save all the edited parameters into a User Sound loca-
tion in memory.
1 While in Sound Edit mode, choose the Write Sound command from the page
menu to open the Write Sound dialog.
Sound name
Sound bank
Sound location
Touch to open
the Sound Select
window
2 You may change the name of the Sound. Touch the Text Edit ( ) icon to
open the virtual keyboard and edit the name.
When done editing the name, confirm by touching the OK button under the
virtual keyboard.
3 When back to the Write Sound dialog, if you want to save onto a different lo-
cation touch the Select button and open the Sound Select window. Choose
To Next Page
Loading...
