Chorus, Flanger, and Phaser (Cho/Fln Phaser) |449
Chorus, Flanger, and Phaser (Cho/Fln
Phaser)
26: Stereo Chorus
This effect adds thickness and warmth to the sound by modulating the delay
time of the input signal. You can add spread to the sound by offsetting the
phase of the left and right LFOs from each other.
Chorus
Chorus
Left
Right
LFO Phase
FX Amt
FX Amt
Stereo In - Stereo Out
EQ Trim
EQ Trim
LEQ
HEQ
LEQ
HEQ
LFO: Tri / Sine
a LFO Waveform Triangle, Sine Selects the LFO Waveform
LFO Phase [degree] –180…+180 Sets the LFO phase difference be-
tween the left and right
b LFO Frequency [Hz] 0.02…20.00 Sets the speed of the LFO
Src Of f…Tempo Selects a modulation source for LFO
speed
Amt –20.00…
+20.00
Sets the modulation amount of LFO
speed
c MIDI Sync Off, On When this is on, the LFO speed is set
by BPM, Base Note, and Times, in-
stead of Frequency
BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–
300 sets the tempo manually for this
individual effect
Base Note
…
Selects the type of notes that specify
the LFO speed
Times x1…x32 Sets the number of notes that specify
the LFO speed
d L Pre Delay [msec] 0.0…50.0 Sets the delay time for the left channel
R Pre Delay [msec] 0.0…50.0 Sets the delay time for the right chan-
nel
To Next Page
Loading...
Need help?
General
