Chorus, Flanger, and Phaser (Cho/Fln Phaser) |459
33: Stereo Flanger
This effect gives a significant swell and movement of pitch to the sound. It
is more effective when applied to a sound with a lot of harmonics. This is a
stereo flanger. You can add spread to the sound by offsetting the phase of
the left and right LFOs from each other.
Flanger
Flanger
Left
Right
Feedback
LFO Shape
LFO Phase
LFO: Tri / Sine
FX Amt
FX Amt
High Damp
Stereo In - Stereo Out
a Delay Time [msec] 0.0…50.0 Sets the delay time from the original
sound
b LFO Waveform Triangle, Sine Selects the LFO Waveform
LFO Shape –100…+100 Changes the curvature of the LFO
Waveform
c LFO Phase [degree] –180…+180 Sets the LFO phase difference be-
tween the left and right
d LFO Frequency [Hz] 0.02…20.00 Sets the speed of the LFO
Src Of f…Tempo Selects a modulation source for LFO
speed
Amt –20.00…
+20.00
Sets the modulation amount of LFO
speed
e MIDI Sync Off, On When this is on, the LFO speed is set
by BPM, Base Note, and Times, in-
stead of Frequency
BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–
300 sets the tempo manually for this
individual effect
Base Note
…
Selects the type of notes that specify
the LFO speed
Times x1…x32 Sets the number of notes that specify
the LFO speed
f Depth 0…10 0 Sets the depth of LFO
modulation