Preparing to record |203
Copying the Key/Chord to other Chord Variation or Style tracks
Once you have chosen a Key/Chord for the selected track, you can copy and
paste it onto all the other tracks of the Chord Variation or Style.
1 While in Style Record, choose the Copy Key/Chord command from the page
menu, to open the Copy Key/Chord dialog box.
2 Copy the Key/Chord of the selected track to all the other tracks of the Chord
Variation (Current Chord Variation Tracks), or to the whole Style (All Style
Tracks).
This will speed-up pattern programming, and avoid having tracks in different
keys within the same Chord Variation.
Choosing an NTT table for the selected track
▪ Use the NTT Type and NTT Table parameters to choose an NTT (Note
Transposition Table) for the selected track of the current Chord Variation.
An NTT is a set of sophisticated algorithms that allows Korg arrangers to
convert recognized chords into musical patterns. The NTT determines how
the arranger will transpose pattern notes, when a chord is recognized that
does not exactly match the original chord of a Chord Variation.
For example, if you only recorded a Chord Variation for the CMaj chord, when
a CMaj7 is recognized on the keyboard the arranger must transpose some
notes to create the missing 7th.
NTT parameters are not used by Drum and Percussion tracks, and are there-
fore dimmed when selecting these tracks.
To Next Page
Loading...
Need help?
General
