Delay |529
i: Time Over? L, R
You can set the delay time up to 2,550msec. If the delay time exceeds this
limit, the error message “OVER!” appears in the display. Set the delay time
parameters so that this message will not appear. “Time Over?” is only a
display parameter.
69: St.BPMAutoPanDly (Stereo BPM Auto Panning Delay)
This stereo auto panning delay enables you to set the delay time to match
the song tempo.
Tempo
BPM
BPM
Base Note x Times
Base Note x Times
Left
Right
FX Amt
FX Amt
Stereo In - Stereo Out
LFO Phase
LFO Shape
Pan
Pan
LFO: Tri / Sin
Depth
Delay
Delay
High Damp Low Damp
High Damp
Low Damp
Feedback
a BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300
sets the tempo manually for this individ-
ual effect
Time Over? L ---, OVER! Display the error message if the left chan-
nel delay time exceeds the upper limit
R ---, OVER! Display the error message if the right
channel delay time exceeds the upper
limit
b L Delay Base Note
…
Selects the type of notes to specify the
left channel delay time
Times x1…x32 Sets the number of notes to specify the
left channel delay time
Feedback –100…+100 Sets the feedback amount for the left
channel
c R Delay Base Note
…
Selects the type of notes to specify the
right channel delay time
Times x1…x32 Sets the number of notes to specify the
right channel delay time
Feedback –100…+100 Sets the feedback amount for the right
channel