178| Customizing the Styles
Choosing how to play chords (Chord Recognition mode)
You can play chords in the simplest (even simplified), or the most sophisti-
cate way. It’s at you how chords have to be played to be recognized.
1 Go to the Global > Mode Preferences > Style page.
As an alternative, keep the SHIFT button pressed and press the STYLE PLAY
button to open the Style page.
2 Choose how to play chords by using the Chord Recognition menu.
Chord Recognition How to play chords
One Finger This mode is only available when the SPLIT indicator is turned on.
If you turn it off, the mode will automatically switch to Fingered.
With this mode, you can compose a chord using a simplied
chord playing technique:
• Play a single note for a Major chord to be recognized.
• Play the root note, plus a white key on the left, for a 7th. For
example, play C3 + B2 for a C7.
• Play the root note, plus a black key on the left, for a Minor chord.
For example, play C3 + Bb2 for a C minor.
• Play the root note, plus a white and a black key on the left, for a
Minor 7th. For example, play C3 + B2 + Bb2 for a C min 7.
One Finger Plus This mode works like One Finger. However, if you play complete
chords, it will recognize them as if you were in Fingered (3 Notes).
This way, you can play chords that One Finger cannot recognize.
Fingered (1 Note) When the SPLIT indicator is turned on, play one or more notes to
compose a chord. A full Major chord will be recognized even if
only a single note is played.
When the SPLIT indicator is turned off, play at least three notes to
compose a chord.
Fingered (3 Notes) Always play three or more notes for a chord to be recognized.
To Next Page
Loading...
Need help?
General
