160| Advanced editing of the Sound sets
External Sounds and Program Change messages
A track set to the External status cannot play the internal sounds. Instead
of the assigned Sound name, the <E: aaa.bbb.ccc> indicator is shown on a
track’s area in the Main page:
Control Change/
Program Change area
This indicator begins with a remark saying the track is in External (‘E’) mode,
and continues with a strings of transmitted Control Change and Program
Change data. This will let you know what the track is transmitting. In the fol-
lowing example, CC#0 is the Control Change 0 (Bank Select MSB), CC#32 is
the Control Change 32 (Bank Select LSB), PC is the Program Change:
CC#32
value
PC value
When touching the Sound area, the numeric keypad appears, instead of the
Sound Select window. You can enter the Control Change/Program Change
bundle shown above, separating the three parts with a dot (.).
Mono, Poly, Drum type
Each track can be set as monophonic, polyphonic, or as a Drum/Percussion
track.
Choose the track type
1 Go to the Track Control > Mode page.
To Next Page
Loading...
Need help?
General
