600| Effects for the MIDI Sounds
120: L/C/R Long Delay
This multitap delay outputs three Tap signals to left, right and center respec-
tively. You can set a maximum of 5,460msec for the delay time.
C Delay
R Delay
Left
Right
Feedback
Spread
FX Amt
FX Amt
FX Amt = 100: Mono In - Stereo Out / FX Amt = 0: Stereo In -Stereo Out
Input Level D-mod
High Damp Low Damp
L Delay
Input Level D-mod
+
Level
Level
Level
a L Delay Time [msec] 0…5460 Sets the delay time of TapL
Level 0…50 Sets the output level of TapL
b C Delay Time [msec] 0…5460 Sets the delay time of TapC
Level 0…50 Sets the output level of TapC
c R Delay Time [msec] 0…5460 Sets the delay time of TapR
Level 0…50 Sets the output level of TapR
d Feedback (C Delay) –100…+100 Sets the feedback amount of TapC
Src Off…Tempo Selects the modulation source for the
TapC feedback
Amt –100…+100 Sets the modulation amount of the
TapC feedback
e High Damp [%] 0…10 0 Sets the damping amount in the high
range
Low Damp [%] 0 …10 0 Sets the damping amount in the low
range
f Input Level Dmod [%] –100…+100 Sets the modulation amount of the in-
put level
Src Off…Tempo Selects the modulation source for the
input level
g Spread 0…50 Sets the width of the stereo image of
the effect sound