Sound routing, polyphony, key and velocity range |161
2 Use the Type parameter to choose the track type.
Type Meaning
Drum Drum/Percussion track. Set a Keyboard Sound to Drum mode, if
you don’t want it to be transposed (it will behave as a Drum Kit,
even if it is an ordinary Sound). Also, set it to Drum mode if you
wish to separately adjust the volume for each percussive family of
a Drum Kit.
Drum Kits are never transposed, whichever the type of track they
are assigned to.
This parameter will appear dimmed (non-editable), it the track has
already been set to Drum or Percussion mode in Style Record.
Poly Tracks of this kind are polyphonic, i.e. they can play more than one
note at the same time.
Mono Tracks of this kind are monophonic, i.e. each new note stops the
previous note.
Mono Right A Mono track, with priority assigned to the rightmost (highest) note.
Mono Left A Mono track, with priority assigned to the leftmost (lowest) note.
Key and Velocity Range
You can program a key and velocity zone for each of the Keyboard Sounds.
Key range is useful to create a set of Keyboard tracks playing in different zones
of the keyboard. For example, you may have French Horns and Woodwinds
playing in the center range of the keyboard, while only Woodwinds play on
the higher range.
Velocity range is useful to create a sound made of up to three dynamic lay-
ers, assigning each of the Upper tracks to a different velocity zone. As an
example, you may choose El.Piano 1 as the Upper 1 Sound, and El.Piano 2 as
the Upper 2 Sound. Then, set Upper 1 to Bottom=0, Top=80, and Upper 2 to
Bottom=81, Top=127. The El.Piano 1 will play when playing softer, the El.Piano
2 when playing louder.
To Next Page
Loading...
Need help?
General
