190| Editing the Style Settings
Setting a key range and wrap-around
1 Go to the Style Play > Style Controls > KbdRng/Wrap page.
2 Use the Kbd Range On/Off checkbox to turn the Key Range on/off.
While in Style Record you can set a Key Range for each track of each Style
Element. You can save the general on/off status of the Key Range in the
Style Settings.
Kbd Range Meaning
On The Key Range is considered. When a track goes over the lower
or higher Key Range point, it is automatically transposed, to re-
main inside the programmed range.
Off No Key Range considered.
3 Use the Wrap Around knob to set a wrap-around point.
The wrap-around point is the highest key for the backing track. When the
detected chord’s pitch is too high, the Style pattern might be transposed to
a range that is too high, therefore sound unnatural. So, when the pattern
reaches the wrap-around point, it will jump to a lower octave.
It is advisable to set different wrap-around points for each track, to avoid
that all tracks ‘jump’ to a different octave at the same time. We suggest to
consider the actual range of the real instrument.
Wrap Around Meaning
1 … 12 Maximum transposition (in semitones) of the track, referred to the
original Key/Chord of the Style pattern.
▪ Write the Style Settings.
To Next Page
Loading...
