278| Recording MIDI Songs
Recording
Turn on the metronome
▪ Press the METRONOME ( ) button to turn the metronome on or off while
recording.
Select the track to record
1 Use the TRACK SELECT button to switch between Song Tracks 1-8 and Song
Tracks 9-16.
2 Touch the track to record to select it. The Record icon ( ) will appear.
Record
1 Press the PLAY/STOP ( ) button to begin recording.
A 1-measure precount will play before the recording actually begins. When
it begins, record freely.
2 When finished recording, press the PLAY/STOP ( ) button to stop the
sequencer.
3 Select a different track, and go on recording the whole Song.
While recording, you can see the current measure and current beat in the
header. You can also check the free memory available for recording.
Beat MeasureFree memory
Exit from Record
1 When finished recording, either press the RECORD button, or choose the
Exit from Record command from the page menu to return to the main page
of the Sequencer mode.
2 While in the main page of the Sequencer mode, press the PLAY/STOP ( )
button to listen to the recorded Song.
3 Save the Song to a storage device, to avoid losing it when the instrument
enters standby. This is explaing later in this section.
To Next Page
Loading...
Need help?
General
