Easy editing of Drum Kits |163
Easy editing of Drum Kits
You can adjust the volume and edit the main parameters for each family of
Drum and Percussion instrument for the selected track. A list of families is
shown below.
These parameters can be accessed only on tracks set to the Drum mode
in the Track Controls > Mode page. Use them on tracks with a Drum Kit as-
signed, or you will not be able to hear any change.
Edit the Drum Kits
1 Go to the Track Controls > Drum Edit page.
2 If you like, start the Style or Song to listen to the changes during playback.
3 If you like, solo the track you are editing, to isolate it from the other tracks.
4 Use the Select buttons to select a track set to Drum mode (usually, the Drum
and Percussion tracks).
After selecting a track set in Drum mode, the parameters in the page can be
selected (otherwise, they remain dimmed).
To Next Page
Loading...
Need help?
General
