310| Editing the MIDI Songs
Converting notes to RX Noises
You can use the RX Convert page to convert notes of a Standard MIDI File
into RX Noises, and vice-versa. This will help programming Songs on an ex-
ternal sequencer.
1 Go to the Sequencer > Song Edit > RX Convert page.
2 Use the Track parameter to choose the track to edit.
Track Meaning
All All tracks.
Track 1 … 16 Selected track.
▪ Use the RX Notes Velocity parameter to set the volume level of the RX
Noises in the selected track(s), then touch the Execute button.
▪ Touch the Execute button next to the Add RX Noises to Guitar Tracks pa-
rameter to automatically analyze the Standard MIDI File, and add RX Noises
to Guitar tracks.
This command scans a single track or the whole Standard MIDI File, looking
for guitar strumming played by nylon, steel or electric guitars. After scan-
ning, a suitable Guitar sound will be automatically assigned to the relevant
tracks, and RX Noises automatically added where needed.
▪ Touch the Execute button next to the Convert RX Noises to MIDI Notes pa-
rameter to convert the RX Noises contained in the selected track to ordinary
MIDI Notes.
▪ Touch the Execute button next to the Convert MIDI Notes to RX Noises
parameter to convert all the relevant MIDI Notes in the selected track to RX
Noises.
To Next Page
Loading...
Need help?
General
