Korg HAVIAN 30 User Manual

592| Effects for the MIDI Sounds
116: Multitap Cho/Delay (Multitap Chorus/Delay)
This effect has six chorus blocks with different LFO phases. You can produce
a complex stereo image by setting a different delay time and depth for each
block. You can control the delay output level via a modulation source.
Left
Right
Feedback
FX Amt
FX Amt
FX Amt = 100: Mono In - Stereo Out / FX Amt = 0: Stereo In -Stereo Out
+
LFO: Triangle
0 [degree]
180 [degree]
60 [degree]
240 [degree]
120 [degree]
300 [degree]
Tap1 Delay
Tap2 Delay
Tap3 Delay
Tap5 Delay
Tap6 Delay
Tap4 Delay
D
-mod
On/Off Control
Panning Preset
a LFO Frequency [Hz] 0.02…13.00 Sets the speed of the LFO
b Tap1 (000) [msec] 0…2000 Sets the Tap1 (LFO phase=0
degrees) delay time
Depth 0…30 Sets the Tap1 chorus depth
Status Always On, Always
Off, On›Off (Dm),
Off›On (Dm)
Selects on, off, or modulation
source for the control of Tap1
output
c Tap2 (180) [msec] 0…2000 Sets the Tap2 (LFO phase=180
degrees) delay time
Depth 0…30 Sets the Tap2 chorus depth
Status Always On, Always
Off, On›Off (Dm),
Off›On (Dm)
Selects on, off, or modulation
source for the control of Tap2
output
d Tap3 (060) [msec] 0…2000 Sets the Tap3 (LFO phase=60
degrees) delay time
Depth 0…30 Sets the Tap3 chorus depth
Status Always On, Always
Off, On›Off (Dm),
Off›On (Dm)
Selects on, off, or modulation
source for the control of Tap3
output

Korg HAVIAN 30 Specifications

General

Brand	Korg
Model	HAVIAN 30
Category	Musical Instrument
Language	English