Programming the Pedal/Footswitch |643
Upper 2, and off on Upper 1, you can use a continuous pedal to control only
the Strings’ volume, while the Piano remains unchanged.
1 Go to the Keyboard/Ensemble > Keyboard Control page.
2 Use the Expression checkbox to turn the Expression pedal on/off on each
Keyboard Sound.
3 Write the changes to a Sound set.
Calibrating the pedal and setting its polarity
From time to time, you might have to calibrate the supplied damper pedal to
use its full range of values, without any ‘dead spot’.
Calibrate the pedal
1 Go to the Global > Controllers > Foot Controllers page.
To Next Page
Loading...
