Mono-Mono Serial (Mono-Mono) |549
85: Comp - OD/HiGain (Compressor - Overdrive/Hi.Gain)
This effect combines a mono compressor and an overdrive/high-gain distor-
tion. You can change the order of the effects.
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Mono Out / FX Amt = 0: Stereo In - Stereo Out
+
Routing
Overdrive / Hi-Gain
3 Band PEQ
Output Level
Mode: Overdrive / Hi-Gain
Drive
Driver
Compressor
Output Level
Envelope - Control
Comp
FX Amt
COMPRESSOR
a [C] Sensitivity 1…10 0 Sets the sensitivity
b [C] Attack 1…10 0 Sets the attack level
Output Level 0 …10 0 Sets the compressor output level
OD/HI-GAIN
c [O] Drive Mode Overdrive,
Hi-Gain
Switches between overdrive and high-
gain distortion
Drive 1…10 0 Sets the degree of distortion
d [O]Output Level 0…50 Sets the overdrive output level
Src Off…Tempo Selects the modulation source for the
overdrive output level
Amt –50…+50 Sets the modulation amount of the over-
drive output level
e [O]Low Cutoff [Hz] 2 0 …1. 0 0 k Sets the center frequency for Low EQ
(shelving type)
Gain [dB] –18…+18 Sets the gain of Low EQ
f [O]Mid1 Cutoff [Hz] 300…10.00k Sets the center frequency for Mid/High
EQ 1 (peaking type)
Q 0.5…10.0 Sets the band width of Mid/High EQ 1
Gain [dB] –18…+18 Sets the gain of Mid/High EQ 1
g [O]Mid2 Cutoff [Hz] 500…20.00k Sets the center frequency for Mid/High
EQ 2 (peaking type)
Q 0.5…10.0 Sets the band width of Mid/High EQ 2
Gain [dB] –18…+18 Sets the gain of Mid/High EQ 2
To Next Page
Loading...
Need help?
General
