Delay |523
a: Time Over?
You can set the delay time up to 5,460msec. If the delay time exceeds this
limit, the error message “OVER!” appears in the display. Set the delay time
parameters so that this message will not appear. “Time Over?” is only a
display parameter.
66: Stereo BPM Delay
This stereo delay enables you to set the delay time to match the song tempo.
Left
Right
Feedback
FX Amt
FX Amt
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High Damp Low Damp
High Damp
Low Damp
Tempo
BPM
BPM
Base Note x Times
Base Note x Times
Adjust [%]
Adjust [%]
Delay
Delay
a BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300 sets the
tempo manually for this individual effect
Time Over? L ---, OVER! Display the error message if the left channel delay
time exceeds the upper limit
R ---, OVER! Display the error message if the right channel de-
lay time exceeds the upper limit
b L Delay Base
Note
…
Selects the type of notes to specify the left chan-
nel delay time
Times x1…x32 Sets the number of notes to specify the left chan-
nel delay time
Adjust [%] –2.50…
+2.50
Fine-adjust the left channel delay time
c R Delay Base
Note
…
Selects the type of notes to specify the right chan-
nel delay time
Times x1…x32 Sets the number of notes to specify the right
channel delay time
Adjust [%] –2.50…
+2.50
Fine-adjust the right channel delay time
To Next Page
Loading...
Need help?
General
