Korg HAVIAN 30 User Manual

524| Effects for the MIDI Sounds
d L Feedback –100…
+10 0
Sets the feedback amount for the left channel
Src Off…
Tempo
Selects the modulation source of feedback
amount
Amt L –100…
+10 0
Sets the modulation amount of the left channel
feedback
e R Feedback –100…
+10 0
Sets the feedback amount for the right channel
Amt R –100…
+10 0
Sets the modulation amount of the right channel
feedback
f High Damp
[%]
0…10 0 Sets the damping amount in the high range
g Low Damp
[%]
0…10 0 Sets the damping amount in the low range
h Input Level
Dmod [%]
–100…
+10 0
Sets the modulation amount of the input level
Src Off…
Tempo
Selects the modulation source for the input level
i Wet/Dry Dry,
1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…
Tempo
See DMS (Dynamic Modulation Source)
Amt –100…
+10 0
Amount of modulation source
a: Time Over? L, R
You can set the delay time up to 2,730msec. If the delay time exceeds this
limit, the error message “OVER!” appears in the display. Set the delay time
parameters so that this message will not appear. “Time Over?” is only a
display parameter.

Korg HAVIAN 30 Specifications

General

Brand	Korg
Model	HAVIAN 30
Category	Musical Instrument
Language	English