MIDI communication settings |671
MIDI communication settings
Connecting the keyboard to the internal or external sounds
The ‘local’ controls (keyboard, physical controllers) can be connected to the
internal sounds directly, or echoed back from an external device.
1 Go to the Global > MIDI > General Controls page.
2 Use the Local Control On parameter to connect or disconnect the keyboard
and controllers to the internal sounds.
Local Control Meaning
On When you play the keyboard, MIDI data are sent to the internal
sound generator. If Sounds are assigned to a MIDI OUT channel,
data are also sent to the USB DEVICE port.
Off The keyboard is connected to the USB DEVICE port, but cannot
play the internal sound generator.
This is very useful when working with an external sequencer, to
send notes and various MIDI messages from the integrated key-
board and controllers to the external sequencer, and then let the
sequencer send them back to the sound generator, without over-
lapping.
This parameter is automatically activated each time the instrument is turned
on.
To Next Page
Loading...
Need help?
General
