Delay |525
67: St.BPM Mtap Delay (Stereo BPM Multi tap Delay)
This four-tap delay enables you to select a tempo and rhythm pattern to set
up each tap.
Tempo
BPM
BPM
Base Note x Times
Base Note x Times
Left
Right
Feedback
Spread
FX Amt
FX Amt
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High Damp
Low Damp
High Damp
Low Damp
Delay
Delay
Feedback
Tap1 Level
Mode
Mode
(1)
(2)
(1)
(2)
Tap1=(1)
Tap2=(2)
a Mode Normal, Cross
Feedback,
Cross Pan1,
Cross Pan2
Switches the left and right delay routing
b BPM MIDI,
40.00…
300.00
MIDI syncs to the system tempo; 40–300
sets the tempo manually for this individ-
ual effect
Time Over? 1 ---, OVER! Displays an error message when the de-
lay time for Tap1 exceeds the upper limit
2 ---, OVER! Displays an error message when the de-
lay time for Tap2 exceeds the upper limit
c Tap 1 Base Note
…
Selects the type of notes to specify the
delay time for Tap1
Times x1…x32 Sets the number of notes to specify the
delay time for Tap1
d Tap 2 Base Note
…
Selects the type of notes to specify the
delay time for Tap2
Times x1…x32 Sets the number of notes to specify the
delay time for Tap2
e Tap1 Level 0…10 0 Sets the Tap1 output level
f Feedback (Tap2) –100…+100 Sets the Tap2 feedback amount
Src Of f…Tempo Selects the modulation source of the
Tap2 feedback amount
Amt –100…+100 Sets the modulation amount of the Tap2
feedback amount